2MP Smart IP Outdoor Bullet Camera

Key Features

  • 1/2.8” Progressive Scan CMOS
  • 1080p @ 60fps frame rate
  • High light environment
  • Slow shutter
  • 140dB WDR
  • 3D DNR
  • -H: smart heater
  • -S: Audio/Alarm IO
  • Support 128G on-board storage
  • DC12V/PoE(802.3at)

Technical Specifications

Camera
Image Sensor: 1/2.8″ Progressive Scan CMOS
Min. Illumination: 0.005 Lux @ (F1.2, AGC ON), 0 lux with IR
0.007 Lux @ (F1.4, AGC ON), 0 lux with IR
Shutter time: 1s ~ 1/100,000s
Slow shutter: Support
Lens: 2.8-12mm @ F1.4 angle of view: 113°~33.8°; 8-32mm @ F1.4 angle of view: 31.2°~10.2°
Lens Mount: AF automatic focusing and motorized zoom lens
Auto Iris: DC drive
Day& Night: IR cut filter with auto switch
Wide Dynamic Range: 140dB
Compression Standard
Video Compression: H.264+/H.264/MJPEG
H.264 code profile: Baseline Profile / Main Profile / High Profile
Video bit rate: 32Kbps~16Mbps
Audio Compression: G.711/G.722.1/G.726/MP2L2
Audio bit rate: 64Kbps(G.711) / 16Kbps(G.722.1) / 16Kbps(G.726) / 32-128Kbps(MP2L2)
Image
Max. Image Resolution: 1920 x 1080
Frame Rate: 50Hz: 50fps (1920 × 1080)/(1280 × 960)/(1280 × 720)
60Hz: 60fps (1920 × 1080)/(1280 × 960)/(1280 × 720)
Third Stream: Independent with Main Stream and Sub Stream, up to
50/60Hz: 20fps(1280 × 720)
Image Enhancement: BLC/HLC/3D DNR/ROI/Defog
Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
Distortion Correction: Support
Target Cropping: Support
Picture Overlay: LOGO picture can be overlaid on video with 128×128 24bit bmp format
Day/Night Switch: Auto/Schedule/Triggered by Alarm In
Network
Network Storage: NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger: Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
General Function: User Authentication, Watermark, IP address filtering
System Compatibility: ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI
Interface
Audio: 1-ch 3.5 mm audio in (Mic in/Line in)/out interface
Communication Interface: 1 RJ45 10M/100M/1000M Ethernet port
Alarm: 1 input, 1 output (up to DC24V 1A or AC110V 500mA)
Video Output: 1Vp-p Composite Output (75 Ω, BNC)
On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button: Yes
Audio
Environment Noise Filtering: Support
Audio I/O: Support dual audio track, stereo
Audio Sampling Rate: 16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis: Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection: Cross a pre-defined virtual line
Intrusion Detection: Enter and loiter in a pre-defined virtual region
Region Entrance: Enter a pre-defined virtual region from the outside place
Region Exiting: Exit from a pre-defined virtual region
Unattended Baggage: Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal: Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections: Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition: Face detection recognition
Statistics: Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
Operating Conditions: -30 °C – 60 °C (-22 °F – 140 °F)
Humidity 95% or less (non-condensing)
-H: -40 °C – 60 °C (-40 °F – 140 °F) with smart heater on
Power Supply: 12 VDC ± 10%, PoE (802.3af)
Power Consumption: Max. 12W, -H: 18W Max
Weather Proof: IP67
IR Range: 50m(2.8~12mm)/100m(8~32mm)
Dimensions: 100×103.9×311.8mm (3.94” × 4.09” × 12.28”)
Weight: 2000 g (4.41 lbs)

 

Downloads