2MP Low Light ANPR IR Camera

Key Features

1/1.8’Progressive Scan CMOS

Full HD1080p video

Up to 30fps frame rate

Ultra-low light

120db WDR

3D DNR

Motorized lens with smart focus

-H:built-in heater

-S:audio/alarm IO

support 128G on-board storage

DC12V/PoE

IP 67

Build in 4 IR LEDs

ANPR- SD card required

Technical Specifications

Camera
Image Sensor: 1/1.8″ Progressive Scan CMOS
Min. Illumination: 0.002 Lux @ (F1.2, AGC ON), 0.0027 Lux @ (F1.4, AGC ON), 0 Lux with IR
Shutter time: 1s ~ 1/100,000s
Slow shutter: Support
Lens: 2.8~12mm @ F1.4, angle of view: 92°~32°
8~32mm @F1.4,angle of view:50.4°-15.7°
Lens Mount: AF automatic focusing and motorized zoom lens
Auto Iris: DC drive
Day& Night: IR cut filter with auto switch
Wide Dynamic Range: 120 dB
Compression Standard
Video Compression: H.264/MPEG4/MJPEG
H.264 code profile: baseline profile/high profile/main profile
Video bit rate: 32Kbps~16Mbps
Audio Compression: G.711/G.722.1/G.726/MP2L2
Audio bit rate: 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-128Kbps(MP2L2)
Image
Max. Image Resolution: 1920 x 1080
Frame Rate: 50Hz:50fps(1920×1080), 50fps(1280×960), 50fps(1280×720)
60Hz:60fps(1920×1080), 60fps(1280×960), 60fps(1280×720)
Image Enhancement: BLC/3D DNR/ROI/Defog/EIS
Image Settings: Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
Distortion Correction: Support
Target Cropping: support
Picture Overlay: LOGO picture can be overlaid on video with 128×128 24bit bmp format
Day/Night Switch: Auto/Schedule/Triggered by Alarm In
Network
Network Storage: NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger: Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols: TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
General Function: User Authentication, Watermark, IP address filtering
System Compatibility: ONVIF, PSIA, CGI, ISAPI
Interface
Audio: 1-ch 3.5 mm audio in (Mic in/Line in)/out interface
Communication Interface: 1 RJ45 10M / 100M Ethernet interface
Alarm: 1 input, 1 output (up to DC24V 1A or AC110V 500mA )
Alarm Input: 1
Alarm Output: 1
Video Input: 1 RJ12 interface
Video Output: 1Vp-p Composite Output (75 Ω, BNC)
On-board storage: Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button: Yes
Audio
Environment Noise Filtering: Support
Audio I/O: Support dual audio track, stereo
Audio Sampling Rate: 16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis: Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection: Cross a pre-defined virtual line
Intrusion Detection: Enter and loiter in a pre-defined virtual region
Region Entrance: Enter a pre-defined virtual region from the outside place
Region Exiting: Exit from a pre-defined virtual region
Unattended Baggage: Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal: Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections: Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition: Face detection recognition
Statistics: Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
Operating Conditions: -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply: 12 V DC ± 10%, PoE (802.3at)
Power Consumption: Max. 12 W
Weather Proof: IP67
Dimensions: 100×103.9×311.8 mm (3.94” × 4.09” × 12.28”)
Weight: 200g

Downloads